Q: Does anyone have any recommendations for steel patination?

A: Different steels need different treatment, but basically the same preparation: the raw steel must be sandblasted clean, then immediately treated with patina, which is generally an acidic chemical that produces oxides on the surface of the metal. The principle is the same as when applying a patina to bronze, but steel is supposed to be a bit more difficult, and the range of colors that have been worked out is more limited. Some even apply copper-filled lacquers to the surface of their steel, then patina it like bronze.

Although nothing is forever, there are some patinas that are more or less permanent. Birchwood-Casey makes a "presto-black" cold patina for steel that is supposed to be fairly good, and works as a base for further patination. Various colors are possible with ferrous metal, from rust red to whites, browns, and greens.

Please bear in mind that patination can be a hazardous thing to do: the chemicals are often highly poisonous by inhalation or skin contact, not to mention what happens when you splash them in your eyes. Be sure to use nitrile (chemical resistant) rubber gloves, chemical-splash protective goggles, rubber aprons, and respirators with cartridges approved for acid gasses. Never add water to concentrated acid- it can boil up into your face- add acid to water. Get a good handbook for patination like Ron Young's as well as a manual of toxicology like Artist Beware by Michael McCann (c1979 Watson-Guptill NY), and try to choose the chemicals that are least toxic whenever possible. If you are doing this in anything less than a state-of the art lab facility that is equipped for such things, avoid the temptation to mess with some of the most toxic chemicals, no matter what a good job they are supposed to do; remember, you can usually pay a foundry to patina your work, even if they didn't cast it.

When a patina has been applied, it is usually waxed to preserve the color. Especially when outside, the atmosphere will have an effect on most unprotected patinas. Rennaisance Wax, available from Bryant Labs in Berkeley CA ( 510- 526-3141), along with a good collection of patina chemicals, is formulated for this purpose, but regular paste wax works pretty well. Or you can use linseed oil to seal your basic rust "patina". It is possible to add pigments or dyes to this clear protective coating for further color variations.

In the Nov-Dec '95 issue of Fabricator magazine (e-mail nomma2@aol.com for info) Ron Young, the great guru of patination, offered an overview of the subject of ferrous metal patination. I highly recommend the books on ceramic-shell casting and patination, available from his company; Sculpt-Nouveau: 1-800-728-5787. For the post-literate, he also sells a video on iron, steel and aluminum patination.

Andrew Werby - United Artworks


RETURN TO UNITED ARTWORKS HOME PAGE